[C320-list] Raymarine S1 Autopilot

[crashley at gte.net]

I installed an ST4000 a few years ago and I don't think I needed to adjust 
any default settings. It does has a rudder position sensor.

CRA
Rosebud #882

----- Original Message ----- 
From: "John Nicholas" <j.nicholas at bigpond.com>
To: <C320-List at Catalina320.com>
Sent: Tuesday, March 11, 2008 2:16 PM
Subject: Re: [C320-list] Raymarine S1 Autopilot


>I have just installed a Raymarine S1 Autopilot on my 320. I am going to
> trial/calibrate it this weekend. I was wondering what settings people use 
> on
> the 320 for the rudder settings (gain, counter, dampening).
>
> John Nicholas
> Sojourn #929
> Sydney
>
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Bill
> Culbertson
> Sent: Wednesday, 12 March 2008 1:04 AM
> To: C320-List at Catalina320.com; c320-list at catalina320.org
> Subject: Re: [C320-list] Dutchman system
>
>
> http://www.mvbinfo.com/images/sf_om_b-c.pdf
>
> There is a table on page 2 of this document from the Dutchman website 
> which
> could be helpful.
>
> -bill
>
> ----- Original Message ----
> From: Scott Thompson <sthompson at toad.net>
> To: c320-list at catalina320.org
> Sent: Monday, March 10, 2008 10:57:32 PM
> Subject: [C320-list] Dutchman system
>
> Replacing my main this year and the sailmaker is suggesting that I
> switch from the two nylon line system with adjustable "continuous loop"
> topping lift to a single line topping lift with three nylon lines.  Is
> anyone out there using a 3 nylon line system?  Sailmaker says the 3 line
> system is per specs from Dutchman.  This will be a full batten main.
>
> Scott Thompson
> Surprise, 653
>
>
>