[C320-list] Installing Barometer/clock...
Orlando.Duran at AveryDennison.com
Orlando.Duran at AveryDennison.com
Fri Mar 14 13:10:22 PDT 2008
You can always put a piece of thin circular teak in the back so that it screws into that thru the bulkhead..thats what I did...
----------------------------------
Regards,
OD
Sent from my BlackBerry Wireless Handheld
----- Original Message -----
From: "Jeff Church" [jjemail at comcast.net]
Sent: 03/14/2008 01:08 PM
To: <C320-List at Catalina320.com>
Subject: Re: [C320-list] Installing Barometer/clock...
Jon,
I chickened out. I didn't want to drill holes in the bulkhead and then find out that the instruments didn't look good there, so I put them above the nav station. It turned out to be a very convenient location.
http://www.catalina320.com/gallery/idlewildinterior/IMG_1177
If you do put them on the bulkhead be careful, it's only maybe 1/2" thick. I found that out the hard way when I installed some coat hooks on the opposite side.
JeffC
----- Original Message -----
From: Jon Vez
To: C320-List at Catalina320.com
Sent: Friday, March 14, 2008 1:39 PM
Subject: [C320-list] Installing Barometer/clock...
All,
I received a barometer/clock set as a gift and I was looking for any advice
on installation-my real question is how did others install on the bulkhead
without exposing the screws right through to the other side?? Any help would
be appreciated!
Regards,
Jon Vez
Solstice #582
- -----------------------------------------------------------------
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
More information about the C320-list
mailing list