[C320-list] Installing Barometer/clock...

[Robert Seastream]

You can also cut a wood 'backing plate' to a thickness that will  
compensate for the screws, if the below method doesn't work for you.   
The equipment will stick out a bit, but the plate won't show unless  
you're looking for it.

Bob Seastream
Intuition # 906

On Mar 14, 2008, at 5:30 PM, Jane & Ken wrote:

> Use a caliper to determine the thickness of the bulkhead and if  
> necessary cut the screws to the correct length--that is what I did  
> and the finished product looks great. No holes show.
>  OBUOY #219
>
> Jon Vez <jonvez at comcast.net> wrote:
>  All,
>
>
>
> I received a barometer/clock set as a gift and I was looking for any  
> advice
> on installation-my real question is how did others install on the  
> bulkhead
> without exposing the screws right through to the other side?? Any  
> help would
> be appreciated!
>
>
>
> Regards,
>
>
>
> Jon Vez
>
> Solstice #582
>
>