[C320-list] Installing Barometer/clock...

[Quentin Murphy]

Since not all of us have a calliper and I also received the same gift a few
months ago, can you give us the screw length if you can still remember?

Quentin Murphy
Celtic Knot #667


-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com]On Behalf Of Jane & Ken
Sent: March 14, 2008 5:31 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Installing Barometer/clock...


Use a caliper to determine the thickness of the bulkhead and if necessary
cut the screws to the correct length--that is what I did and the finished
product looks great. No holes show.
  OBUOY #219

Jon Vez <jonvez at comcast.net> wrote:
  All,



I received a barometer/clock set as a gift and I was looking for any advice
on installation-my real question is how did others install on the bulkhead
without exposing the screws right through to the other side?? Any help would
be appreciated!



Regards,



Jon Vez

Solstice #582