[C320-list] Installing Barometer/clock...

[crashley at gte.net]

QM,

I used short screws to mount my Weems and Plath instruments to the aft side 
of the teak veneered wall between the salon and the fwd berth. I don't know 
how long they were but they didn't come thru. They were quite short, 
probably 3/8". I can measure them if you want.

CRA
Rosebud #882

----- Original Message ----- 
From: "Quentin Murphy" <qmurphy at sympatico.ca>
To: <C320-List at Catalina320.com>
Sent: Friday, March 14, 2008 3:42 PM
Subject: Re: [C320-list] Installing Barometer/clock...


> Since not all of us have a calliper and I also received the same gift a 
> few
> months ago, can you give us the screw length if you can still remember?
>
> Quentin Murphy
> Celtic Knot #667
>
>
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com]On Behalf Of Jane & Ken
> Sent: March 14, 2008 5:31 PM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Installing Barometer/clock...
>
>
> Use a caliper to determine the thickness of the bulkhead and if necessary
> cut the screws to the correct length--that is what I did and the finished
> product looks great. No holes show.
>  OBUOY #219
>
> Jon Vez <jonvez at comcast.net> wrote:
>  All,
>
>
>
> I received a barometer/clock set as a gift and I was looking for any 
> advice
> on installation-my real question is how did others install on the bulkhead
> without exposing the screws right through to the other side?? Any help 
> would
> be appreciated!
>
>
>
> Regards,
>
>
>
> Jon Vez
>
> Solstice #582
>
>