[C320-list] Knot Meter Replacement
Chris Burti
clburti at gmail.com
Sat Mar 22 05:57:42 PDT 2008
If you don't get the transducer fully seated when you replace it, the knot
meter will not work correctly. Miine is difficult to get fully seated. I
have to push down hard turn the cap and push some more.
On Fri, Mar 21, 2008 at 10:39 AM, <Vpweikel at aol.com> wrote:
>
> Has anyone on the list replaced the paddle wheel knot meter unit ?
>
> I have pulled and cleaned mine on several occasions but it still does not
> indicate boat speed reliably. I'll pull it again this spring during
> haulout
> for bottom painting and do another clean and inspection.
>
> Any help on who to contact for a replacement is appreciated.
>
>
> Thanks,
>
> Paul Weikel
> Second Chance
> #361
>
>
>
>
>
> **************Create a Home Theater Like the Pros. Watch the video on AOL
> Home.
> (
> http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001
> )
>
--
Chris Burti
Farmville, NC
More information about the C320-list
mailing list