[C320-list] Knot Meter Replacement

[Chris Burti]

actually, it can be seated enough to seal and not leak but not down far
enough to fully clear the paddle wheel and operate correctly.

On Thu, Mar 27, 2008 at 12:20 AM, <crashley at gte.net> wrote:

> If you don't get it seated correctly you might sink!
>
> CRA
> Rosebud #882
>
> ----- Original Message -----
> From: "Chris Burti" <clburti at gmail.com>
> To: <C320-List at catalina320.com>
> Sent: Saturday, March 22, 2008 5:57 AM
> Subject: Re: [C320-list] Knot Meter Replacement
>
>
> > If you don't get the transducer fully seated when you replace it, the
> knot
> > meter will not work correctly. Miine is difficult to get fully seated. I
> > have to push down hard turn the cap and push some more.
> >
> > On Fri, Mar 21, 2008 at 10:39 AM, <Vpweikel at aol.com> wrote:
> >
> >>
> >> Has anyone on the list replaced the paddle wheel knot meter unit  ?
> >>
> >> I have pulled and cleaned mine on several occasions but it still does
> not
> >> indicate boat speed reliably.  I'll pull it again this spring during
> >>  haulout
> >> for bottom painting and do another clean and inspection.
> >>
> >> Any help on who to contact for a replacement is appreciated.
> >>
> >>
> >> Thanks,
> >>
> >> Paul Weikel
> >> Second Chance
> >> #361
> >>
> >>
> >>
> >>
> >>
> >> **************Create a Home Theater Like the Pros. Watch the video on
> AOL
> >> Home.
> >> (
> >>
> http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001
> >> )
> >>
> >
> >
> >
> > --
> > Chris Burti
> > Farmville, NC
> >
>
>
>


-- 
Chris Burti
Farmville, NC