[C320-list] Knot Meter Replacement

[crashley at gte.net]

If you don't get it seated correctly you might sink!

CRA
Rosebud #882

----- Original Message ----- 
From: "Chris Burti" <clburti at gmail.com>
To: <C320-List at catalina320.com>
Sent: Saturday, March 22, 2008 5:57 AM
Subject: Re: [C320-list] Knot Meter Replacement


> If you don't get the transducer fully seated when you replace it, the knot
> meter will not work correctly. Miine is difficult to get fully seated. I
> have to push down hard turn the cap and push some more.
>
> On Fri, Mar 21, 2008 at 10:39 AM, <Vpweikel at aol.com> wrote:
>
>>
>> Has anyone on the list replaced the paddle wheel knot meter unit  ?
>>
>> I have pulled and cleaned mine on several occasions but it still does not
>> indicate boat speed reliably.  I'll pull it again this spring during
>>  haulout
>> for bottom painting and do another clean and inspection.
>>
>> Any help on who to contact for a replacement is appreciated.
>>
>>
>> Thanks,
>>
>> Paul Weikel
>> Second Chance
>> #361
>>
>>
>>
>>
>>
>> **************Create a Home Theater Like the Pros. Watch the video on AOL
>> Home.
>> (
>> http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001
>> )
>>
>
>
>
> -- 
> Chris Burti
> Farmville, NC
>