[C320-list] Hull Striping

Martin Raphael mraphael at q.com
Sun Nov 23 15:12:24 PST 2008


Thanks Warren and Stephen -- I'll try the wet technique and see how it goes.
----- Original Message ----- 
From: "warren updike" <wupdike at hotmail.com>
To: <C320-List at Catalina320.com>
Sent: Sunday, November 23, 2008 3:07 PM
Subject: Re: [C320-list] Hull Striping


> We bought the stripes from Catalina, CA, and applied them using the
> instructions from the new name decal we applied previously. I had no
> problems.  I can't imagine applying the stripes dry. Since there are three
> pieces on port and two on stbd, I suggest starting on port aft using the 
> wet
> technique. If that doesn't work to your satisfaction, try the dry, and 
> good
> luck.
>
> Warren & Pattie Updike
> Catalina 320, #62, "Warr De Mar"
> Middle River, Chesapeake Bay
>
> -----Original Message-----
> From: Martin Raphael [mailto:mraphael at q.com]
> Sent: Saturday, November 22, 2008 11:17 PM
> To: C320-List at Catalina320.com
> Subject: [C320-list] Hull Striping
>
> Hi all -- some time ago I asked about replacing the hull stripes and got
> some great information.  I ordered the stripes from Catalina Parts but now
> I'm confused again.  In the earlier discussion, everyone mentioned how the
> stripes were applied like a decal...over a mild soapy water solution and
> using a squeegee to press out any bubbles.  But the Catalina person tells 
> me
>
> the material is more like a sticker -- you peel off the backing and apply
> dry -- with no wiggle room or ability to adjust.  So has the material
> changed since others did this...or what?  Has anyone applied this type of
> stripe and have any advice before I begin?
> Thanks,
> Martin Raphael
> Rhapsody #108
> ----- Original Message ----- 
> From: "Bernie Garrett" <berniegarrett at telus.net>
> To: <c320-list at lists.catalina320.com>
> Sent: Saturday, November 22, 2008 1:52 PM
> Subject: [C320-list] Davits Recomendations?
>
>
>>H all,
>>
>>
>>
>> Thanks for the leak and Bimini advice. I have tracked the leak down to 
>> the
>> pipes or hot water tank below the sink. I should be able to figure out
>> exactly where it is coming from taoday.
>>
>> I am looking into fitting Davits and wondered if anyone had any
>> advice/recommendations on best brands to look at.
>>
>>
>>
>> Regards
>> Bernie
>> _________________________________________________
>> Dr. Bernie Garrett,
>>
>> 1006 Eden Crescent
>> Delta, BC, Canada, V4L 1W7
>>
>> Tel: 604 943 3792
>>
>> P Save trees! Please don't print this e-mail unless you really need to
>>
>>
>>
>>
>
>
>
> 




More information about the C320-list mailing list