[C320-list] Dinette question

[annika brancato]

I've followed this topic a few times now, and had anticipated some difficulty in getting the table down.  We purchased our used Catalina 320 last year and have no problem what so ever to move it up or down.. Guess we got lucky.
 
Annika
Snapshot #95> From: kirk.mccullough at telus.net> To: C320-List at Catalina320.com> Date: Sat, 27 Sep 2008 14:26:38 -0700> Subject: Re: [C320-list] Dinette question> > Mine goes down easily with 2 hands pushing down directly over the post. It> comes up on its own. I guess I got lucky on this one.> > Kirk> #124> > -----Original Message-----> From: c320-list-bounces at lists.catalina320.com> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Chef Adam> Weiner> Sent: 24 September 2008 20:36> To: C320-List at Catalina320.com> Subject: Re: [C320-list] Dinette question> > > Orlando, don't go there.> > Adam> > -----Original Message-----> From: c320-list-bounces at lists.catalina320.com> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Irving Grunes> Sent: Wednesday, September 24, 2008 6:39 PM> To: C320-List at catalina320.com> Subject: Re: [C320-list] Dinette question> > We bought into #851 in 2001> This discussion has come up at least once a year since then.> All 320's have this problem.> The only solution has been the different ways to apply a large amount of> pressure directly over the post some how.> No amount or type of lubricant works on that gas spring, only> We haven't dropped our table but once or twice. I did it by putting a towel> on the table, standing on it and bouncing all my weight without jumping to> get it down. Others have sat on the table and "bumped" up and down. It> seems that some of the gas cylinders are a little softer than others, butits> pressure directly over the post.> I think all 320 owner's have had the same problem.> And getting it up is just as much a problem.> Irv Grunes> 2001 #851> > > On Wed, Sep 24, 2008 at 7:04 PM, Peter & Barbara Sheerin <> sheerinp at bigpond.net.au> wrote:> > > Irving has anyone spoken to the factory about the problem with the table?> > ----- Original Message ----- From: "Irving Grunes" <igrunes at gmail.com>> > To: <C320-List at catalina320.com>> > Sent: Thursday, September 25, 2008 8:56 AM> > Subject: Re: [C320-list] Dinette question> >> >> > Remember to push directly over the post.> >> Some people sit or we have even stood on the table and bounced to get the> >> table down.> >> It takes a lot of pressure to get it down> >>> >> And to get it up, we kind of rock it side to side with a little upward> >> pressure. Too much upward pressure and the table top comes off the> >> pedestal.> >>> >> Some people keep it down always.> >> Good luck> >> Irv Grunes> >> #851> >>> >>> >> On Wed, Sep 24, 2008 at 6:03 PM, <tjdames at comcast.net> wrote:> >>> >> I have recently purchased a 2000 Catalina 320. I am looking for> >>> instructions on how to lower the dinette table. I do not know if my post> >>> is> >>> stuck, or I am doing something incorrectly. Can anyone assist?> >>> Thanks!> >>>> >>>> >>> >> > 
_________________________________________________________________
Senaste sportnyheterna & rykande färska resultat!
http://sport.msn.se/