[C320-list] Port lights

[Richard A. Walker]

I would use 3M 4200.

Cheers,
 
Dick Walker
C-320 (687) WindWalker II
740 Olive Ave.
Coronado, CA 92118-2136
619.435.8986

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Joe Abbagnaro
Sent: Tuesday, October 14, 2008 1:06 PM
To: C320-List at catalina320.com
Subject: Re: [C320-list] Port lights

What is a good Material to rebed them with ?

Joe


On Tue, Oct 14, 2008 at 3:35 PM, Monte B. <mjbc60 at sbcglobal.net> wrote:
> Michael,
>
> Judging from the serial number of your boat, if the port lights have not
> been removed and rebedded they are probably leaking there. If they are all
> or 3 out of 4 leaking I don't think anything short of pulling them,
removing
> the old bedding material and resealing them will stop the leaks. If the
> water is collecting in the window latch bases it is the classic symptom.
You
> should also replace the O-rings in the latches while you are in there.
They
> may be obtained at a good hardware store.
>
> Monte
> Laima #620
>
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Michael
> Ferguson
> Sent: Monday, October 13, 2008 2:13 PM
> To: C320-List at Catalina320.com
> Subject: [C320-list] Port lights
>
> I now have water leaking in from the port light seals. Does anyone know if
> the rubber seal can be replaced or do I need new port lights?
> Thanks
> Michael
> 169 Nauti Clew
>
>
>
>
>