[C320-list] Leaking port light

[Chef Adam Weiner]

Didn't Neal Diamond sing a song called "Turn on your Port Light?"  Came out
after ET if I recall.

Adam

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Pat Moriarty
Sent: Wednesday, April 01, 2009 5:50 AM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Leaking portlight

The real question is, is it rubber, or NBR, or 
nitril or vinyl. Just because it is black you 
can't assume it is rubber. Correct rubber does 
not like oils but I sold hydraulic hose for years 
and it is black but not rubber. I have one or two 
of the gaskets and have yet to get it installed 
correctly but the leak quick when the port was 
rebed. I believe they came from Catalina Direct 
and if you only want one I will make you a heck of a deal.

At 02:33 PM 3/31/2009, you wrote:

>Does anyone know part # for portlight gaskets. 
>My boat is a 98. I've called Lewmar twice and we 
>seem to get hung up on window size and gasket 
>part number. I can't find any part number or 
>window size in all my brochures that came with boat.
>Or, does anyone have Lewmar parts ordering contact?
>Thanks,
>Bill Schaffer, #515
>Bohemian II
>
>--- On Tue, 3/31/09, Bill MacRae <seacalling at msn.com> wrote:
>
> > From: Bill MacRae <seacalling at msn.com>
> > Subject: Re: [C320-list] Leaking portlight
> > To: c320-list at catalina320.com
> > Date: Tuesday, March 31, 2009, 1:48 PM
> >
> > Thanks everyone!  I replaced the o'rings a couple of
> > years ago, but I felt the profile was slightly smaller and
> > also did the Armorall trick.  It didn't leak until now
> > and the gasket material is degrading.
> >
> >
> >
> > John, did you have any problems replacing the gaskets?
> >
> >
> >
> > Bill
> >
> >
> >
> >
> >
> > > From: jr_ellis100 at hotmail.com
> > > To: c320-list at catalina320.com
> > > Date: Tue, 31 Mar 2009 09:14:57 -0600
> > > Subject: Re: [C320-list] Leaking portlight
> > >
> > >
> > > Bill,
> > >
> > >
> > >
> > > I replaced all of the gaskets in my portlights last
> > summer. Several were leaking through the O-rings. They are
> > easy to replace once you pry off the cover with a thin
> > knife, then unscrew the latch. I took one of the old O-rings
> > to a nearby Ace Hardware store and got an exact replacements
> > for about 70 cents each. Since then - no more leaks.
> > >
> > >
> > >
> > > John
> > >
> > > 271
> > >
> > > > From: seacalling at msn.com
> > > > To: c320-list at catalina320.com
> > > > Date: Tue, 31 Mar 2009 13:40:01 +0000
> > > > Subject: [C320-list] Leaking portlight
> > > >
> > > >
> > > > I looked through the archives and could not find
> > the o'ring size. Does anyone know what size o'rings are used
> > on the latches and any tips on replacing the gasket? The
> > portlights are the old style with the twist latches. They do
> > not leak around the outside bedding, but the gasket material
> > is in bad shape and it may also be leaking around the o'ring
> > and down the latch.
> > > >
> > > >
> > > >
> > > > Thanks,
> > > >
> > > > Bill
> > > >
> > > >
> > _________________________________________________________________
> > > > HotmailR is up to 70% faster. Now good news
> > travels really fast.
> > > > 
> http://windowslive.com/online/hotmail?ocid=TXT_TAGLM_WL_HM_70faster_032009
> > >
> > >
> > _________________________________________________________________
> > > HotmailR is up to 70% faster. Now good news travels
> > really fast.
> > > 
> http://windowslive.com/online/hotmail?ocid=TXT_TAGLM_WL_HM_70faster_032009
> >
> > _________________________________________________________________
> > HotmailR is up to 70% faster. Now good news travels really
> > fast.
> > 
> http://windowslive.com/online/hotmail?ocid=TXT_TAGLM_WL_HM_70faster_032009

>

Pat Moriarty
PSI Urethanes Inc
PH: 800-888-5156  Fax: 512-837-8733
Please visit our web site at
www.psiurethanes.com