[C320-list] Speaking of Dutchman...

[Jon Vez]

Thanks Jeff...I've had the black dots on them for a while--anticipating that
they would break at the worst possible time ;) I'll try replacing with the
sail on the boat...

Regards,

Jon

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Jeff Hare
Sent: Friday, April 24, 2009 10:01 AM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Speaking of Dutchman...

Jon, Here's my trick.   When the sail is flaked normally,  use a black
marker to make a dot on the face of the dutchman disks that face up.  This
way you can thread the lines with the sail flaked on the boom. The marks
help you be sure to feed the line UP through each disc and out the side with
the dot.  

-JeffH
------Original Message------
From: Jon Vez
Sender: c320-list-bounces at lists.catalina320.com
To: C320-List at Catalina320.com
ReplyTo: C320-List at Catalina320.com
Subject: [C320-list] Speaking of Dutchman...
Sent: Apr 24, 2009 7:31 AM

Does anyone have a recommendation on the best way to replace the lines? I
still have the original lines and plan on replacing them this weekend. Since
I plan on putting the sails on this weekend J I was wondering if it is
easier to rethread the new lines before the sail goes on or before?? Any
suggestions would be appreciated!

 

I'm obviously in the pro-dutchman camp-in my opinion the only better option
I have experienced is a furling boom, but that will have to wait until my
next boat..

 

Regards,

 

Jon Vez

Solstice #582