[C320-list] Raymarine GPS fix?

[Joe Abbagnaro]

I have a Garmin unit.... fom Garmin I can download firmware updates
for the chartplotter. This is internal software that makes the unit work.
Does Raymarine offer the same for thier chartplotter try updating the
internal software
if possible.

Joe
#574

On Wed, Aug 19, 2009 at 5:00 PM, Andrew
Santangelo<andrew_santangelo at mac.com> wrote:
> Sounds like your GPS power is tied to the Autopilot switch.  Turn on the
> Autopilot, on comes the GPS - and then you can see the data from the GPS.
>
> This is a normal hook-up.  My electronics are powered through two separate
> switches.
>
> -- Andrew
> C320 "Dawn Treader"
> #333
>
>
> On Aug 19, 2009, at 1:59 PM, Jack McDonough wrote:
>
>> I had a couple of repairs done to my Raymarine AutoPilot (clutch and new
>> circuit board in the display unit) and since then my Raymarine chart plotter
>> (C-80) won't show lat-lon or other data unless the AutoPilot switch on my
>> nav station panel is turned on. That was never the case before. Any ideas?
>>
>> jack
>> #947
>
>