[C320-list] Raymarine GPS fix?

[Jack McDonough]

Jeff & Andrew:

Yes, apparently my GPS is now powered through my AutoPilot switch. But 
before I had the repairs done on the AutoPilot, the GPS worked 
independently. But, thanks for the response anyway.

jack




----- Original Message ----- 
From: "Andrew Santangelo" <andrew_santangelo at mac.com>
To: <C320-List at Catalina320.com>
Sent: Wednesday, August 19, 2009 2:00 PM
Subject: Re: [C320-list] Raymarine GPS fix?


> Sounds like your GPS power is tied to the Autopilot switch.  Turn on  the 
> Autopilot, on comes the GPS - and then you can see the data from  the GPS.
>
> This is a normal hook-up.  My electronics are powered through two 
> separate switches.
>
> -- Andrew
> C320 "Dawn Treader"
> #333
>
>
> On Aug 19, 2009, at 1:59 PM, Jack McDonough wrote:
>
>> I had a couple of repairs done to my Raymarine AutoPilot (clutch and  new 
>> circuit board in the display unit) and since then my Raymarine  chart 
>> plotter (C-80) won't show lat-lon or other data unless the  AutoPilot 
>> switch on my nav station panel is turned on. That was  never the case 
>> before. Any ideas?
>>
>> jack
>> #947
>