[C320-list] Lights, binacle, props and batteries

[Chris Burti]

I had this to happen, I forgot to put lock tite on the threads to prevent
the screws from backing out. To repair, I installed Helicoils.. google it.
very simple, cheap and permanent solution to stripped threads...

On Tue, Aug 25, 2009 at 10:40 PM, Brad Kuether <bkuether at comcast.net> wrote:

> Agree with the comment on the value of this list and everyone having the
> same (almost) boat more or less.
>
> It has been very helpful to me.  And now I come back to the well again for
> the collective knowledge.....  :)
>
> LED replacement bulbs
>
> I wanted to get back to the subject of LEDs.  It is apparent that the
> different models of 320s have had different light fixtures.  The lights in
> my main cabin have a reflector that is "part" of the hockey puck fixture and
> the replacement part is a two prong halogen bulb.   I am pretty sure it is
> called a "G4".  Here is a picture.
> http://ep.yimg.com/ca/I/yhst-54258538930337_2066_1934154
>
>  It is not as I thought an MR 16.  I pulled the bulb out and put it back
> in.
>
> I am looking at this bulb as an LED replacement:
> http://www.marinebeam.com/g4mitopefort.html
>
> Also for the rear cabin lights I have reading lamps and I "think" I can put
> these in them....
> http://www.marinebeam.com/g4ledbu4smdr.html
>
> Any thoughts on these from a later model 320 perspective?
>
> Binnacle - Autopilot stop.
>
> The stop on my Raymarine autopilot (the finger mounted on the binnacle that
> keeps the whole unit from spinning) is loose.  The 4 self tapping sheet
> metal screws have worked loose and now have nothing left to bite into on the
> binnacle.  The options I have are to:
>  1..  Go "up" in side with the sheet metal screws, from a 10 to a 12. (and
> use loctite)
>  2.. Put in "Self tapping/threading machine screws, hoping the tighter
> threads will help. (and use loctite)
>  3.. Open the holes WAY up and use a rubber "blind fastener". (no loctite
> needed)
> Anyone face this dilemma and how did you solve it?
>
> Prop
>
> I had Independence out in light air last weekend.  While the performance
> wasn't bad, it still felt like I had a parachute attached.  My slip mate put
> a KIWI feathering prop on his boat and he LOVES it.  I wrote the company and
> they said "Catalina owners love us".  He sent me a list but I didn't
> recognize any of the names or haven't seen them frequently enough.  Does
> anyone on the list have a KIWI prop mated to their Yanmar 3GM or 3YM motor?
>  And how do you like it?
>
> My main concern is light air performance as I sail in the light air sailing
> capital, "Chesapeake Bay".  But am also interested how well it backs up and
> if it has helped in that aspect as well.
>
> Batteries
>
> I had asked a while back about how to leave the boat plugged in with the
> fridge running.  The feedback I got was "refrigerator running, battery
> charger on, battery switch on both."
>
> While down at the dock my neighbor said "Yes, but turn the battery switch
> to 1 or 2 but not both as it will cause a short."
>
> Any thoughts or wisdom on this?  I freaked out last night after thinking
> about it and ran down this afternoon to shut the whole thing down.  (Boo,
> now I will have warm beer....)
>
> I just don't want to burn up my batteries or burn the boat to the water
> line.
>
> Thanks again for all the help and guidance.  Every day I learn a little
> more and get more comfortable.
>
> -Brad, Mary, Monica, and Jarod
> "Independence"
> 2004 Catalina 320 Hull 1006
> Middle River, MD
>
>


-- 
Chris Burti Farmville, NC