[C320-list] Catalina Custom Exhaust Elbow
Bruce Stumpp
bstumpp at comcast.net
Fri Aug 28 14:19:17 PDT 2009
Has anyone on the forum had a new exhaust elbow made by Catalina? If so,
what was the cost, results?
Bruce Stumpp
Adventure, #647
Message: 6
Date: Tue, 25 Aug 2009 18:13:11 -0400
From: "Jon Vez" <jonvez at comcast.net>
To: <C320-List at Catalina320.com>
Subject: Re: [C320-list] Catalina Custom Exhaust Elbow
Message-ID: <003401ca25d1$3bdb49a0$b391dce0$@net>
Content-Type: text/plain; charset="iso-8859-1"
Walter, you have two options--you can send your current elbow to Catalina
and they will make you a new one. Unbelievably (especially for a production
boat), they don't have these on the shelf and apparently they are all
slightly different.
The other option is to 'convert' to a yanmar standard set up, which are used
on newer hulls. If you buy a yanmar stock setup (from a Yanmar distributor),
you need to buy 3 pieces--the riser, a connector and the elbow. Be careful
though as most of the Catalina custom elbows are 1 5/8" and the standard
Yanmar is 2"? If you take this route, you have to adapt to your muffler
intake (where the hose attaches from the exhaust), which will match the 1
5/8" hose diameter. Hope this helps...
Regards,
Jon Vez
Solstice #582
More information about the C320-list
mailing list