[C320-list] Fwd: shaft alignment
Karl Mielenhausen _/)
c320 at suddenlink.net
Mon Jun 1 10:18:31 PDT 2009
Good chance that one of your jack-nuts has come loose and the alignment is
off. If you find the offending nut, you may get away with just tightening
it back up.
The full procedure is here....
http://www.catalina320.com/filemgmt/index.php?id=80
and worksheet here....
http://www.catalina320.com/filemgmt/index.php?id=81
In addition to the necessary wrenches, you'll need an feeler gauge (old
style with the 3-4" blades) and a piece of .015" shim stock (or 2 sets of
feeler gauges).
Call me at 252-638-1433 if you have questions.
Karl
------- Forwarded message -------
From: wflowe3 at netscape.net
To: c320-list at catalina320.com
Cc:
Subject: [C320-list] shaft alignment
Date: Mon, 01 Jun 2009 10:27:55 -0400
I have a recently purchased 2008 320. Love the boat but when motoring, I
get a noisy "rattle" from 2100 to 2900 rpms.? It has been suggested that
the shaft alignmrnt may be off.?? According to the manual, the alignment
is adjusted by? motor mounts. Has anyone done this alignment themselves
and is it a DIY type job?
Thanx
--
Karl Mielenhausen
Catalina 320 Hull 690
New Bern, NC
Join us August 7-9, 2009 at Marina Del Rey, CA for our annual Catalina
320IA Regatta and Annual Meeting.
More information about the C320-list
mailing list