[C320-list] Fwd: shaft alignment

[wflowe3 at netscape.net]

 Not sure what you mean by jack nuts. Are these on the bolts that hold the 2 coupling plates together?


 


 

-----Original Message-----
From: Karl Mielenhausen _/) <c320 at suddenlink.net>
To: C320IA Discussion List <C320-List at catalina320.com>
Sent: Mon, 1 Jun 2009 12:18 pm
Subject: [C320-list] Fwd:  shaft alignment









Good chance that one of your jack-nuts has come loose and the alignment is off. If you find the offending nut, you may get away with just tightening it back up.?
?

The full procedure is here....?

http://www.catalina320.com/filemgmt/index.php?id=80?

and worksheet here....?

http://www.catalina320.com/filemgmt/index.php?id=81?
?

In addition to the necessary wrenches, you'll need an feeler gauge (old style with the 3-4" blades) and a piece of .015" shim stock (or 2 sets of feeler gauges).?
?

Call me at 252-638-1433 if you have questions.?
?

Karl?
?

------- Forwarded message -------?

From: wflowe3 at netscape.net?

To: c320-list at catalina320.com?

Cc:?

Subject: [C320-list] shaft alignment?

Date: Mon, 01 Jun 2009 10:27:55 -0400?
?

I have a recently purchased 2008 320. Love the boat but when motoring, I?

get a noisy "rattle" from 2100 to 2900 rpms.? It has been suggested that?

the shaft alignmrnt may be off.?? According to the manual, the alignment?

is adjusted by? motor mounts. Has anyone done this alignment themselves?

and is it a DIY type job??
?

Thanx?
?

?

--Karl Mielenhausen?

Catalina 320 Hull 690?

New Bern, NC?
?

Join us August 7-9, 2009 at Marina Del Rey, CA for our annual Catalina 320IA Regatta and Annual Meeting.?