[C320-list] Front Water Tank Leak Inspection cover

[Paul Rickman]

I went to my local hardware store and purchased a sink drain seal (gasket). Exact match. The O Rings were
not working on my boat either. I don't have a drain hole either. 

Paul
657 Affinity
Bay Bridge Marina





________________________________
From: Joe Abbagnaro <jabbagna at gmail.com>
To: C320-List <c320-list at catalina320.org>
Sent: Wednesday, June 3, 2009 7:35:13 AM
Subject: [C320-list] Front Water Tank Leak Inspection cover

Hi

I have a leak from the inspection cover when the tank is very full
I believe it is coming from the O ring but can not confirm this

Is that the proper seal should there be an O ring on the inspection cover or
some type of flat gasket or washer ?

The other thing is when this leak occurs the water accumulates under
the draws in the front berth
There is no drain whole to allow the water to move into the bilge.
Should I drill a whole in this area ?

Does anyone else have this issue with no drainage in this area ?

Thanks
Joe
#574