[C320-list] Front Water Tank Leak Inspection cover

[Chris Burti]

867 has limber holes and drains to the bilge, teflon pipe tape worked for
us...

On Wed, Jun 3, 2009 at 8:23 AM, Paul Rickman <ilove2sail at verizon.net> wrote:

> I went to my local hardware store and purchased a sink drain seal (gasket).
> Exact match. The O Rings were
> not working on my boat either. I don't have a drain hole either.
>
> Paul
> 657 Affinity
> Bay Bridge Marina
>
>
>
>
>
> ________________________________
> From: Joe Abbagnaro <jabbagna at gmail.com>
> To: C320-List <c320-list at catalina320.org>
> Sent: Wednesday, June 3, 2009 7:35:13 AM
> Subject: [C320-list] Front Water Tank Leak Inspection cover
>
> Hi
>
> I have a leak from the inspection cover when the tank is very full
> I believe it is coming from the O ring but can not confirm this
>
> Is that the proper seal should there be an O ring on the inspection cover
> or
> some type of flat gasket or washer ?
>
> The other thing is when this leak occurs the water accumulates under
> the draws in the front berth
> There is no drain whole to allow the water to move into the bilge.
> Should I drill a whole in this area ?
>
> Does anyone else have this issue with no drainage in this area ?
>
> Thanks
> Joe
> #574
>



-- 
Chris Burti Farmville, NC