[C320-list] Hood Yacht System (jib furling)

[Kirk McCullough]

I have the same furler, and sometimes if the halyard is too tight it's very
hard to furl. Try easing the halyard. 

I got parts from pompanette a couple of years ago when the upper bushing
broke. Good support.

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of jpmesa at aol.com
Sent: 04 May 2009 11:52
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Hood Yacht System (jib furling)



 I'm thinking the same way. Thanks for the info Pat .............. John??
Holokai2


 


 

-----Original Message-----
From: Pat Moriarty <patm at psiurethanes.com>
To: C320-List at Catalina320.com
Sent: Mon, 4 May 2009 10:05 am
Subject: Re: [C320-list] Hood Yacht System (jib furling)









http://www.pompanette.com/pompweb.nsf/0/e7ce00e1ab4c3952852567b3001e6cae?Ope
nDocument 
YOU CAN FIND THE DRAWINGS AND PARTS HERE. Go to tech tips to figure 
out your model because I don't remember and the receipts are on the boat.?
?

I have the same system and just don't want to spend $2000 on a new 
one, but it is not the best by a long shot.?
?

>Pat #130?

>?

>I have a Hood Yachts System jib furling on my 1995 320? #112. I am 
>having some problems with the drum?

>rotating both left and right, had to furl the jib by hand. Everything is
in?

>place at the bottom so I think it something inside? ?Does anyone 
>have the model # or brochure (Hood) or any other information on that 
>unit. I know some of the older furler?

>when you take them apart the bearing go flying all over the place. ??

>?

>?

>?

>Thank you, John???

>Holokai 2?
?

Pat Moriarty?

PSI Urethanes Inc?

PH: 800-888-5156  Fax: 512-837-8733?

Please visit our web site at?

www.psiurethanes.com?
?