[C320-list] TV Mount

[MARTIN and SUSAN RAPHAEL]

What model swing arm did you get and where?
 
> Date: Wed, 20 May 2009 08:05:45 -0700
> From: nadowayne at yahoo.com
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] TV Mount
> 
> Quentin,
>  
> I put my swing-arm mount with 19" LCD TV above the circuit breakers and in front of shelf.  The actual arm is attached to the bulkhead on the left of the breakers and adjacent to the galley.  It hides the stuff on the shelf and fits nicely in that area.  You can swing it to see from most areas on the boat.  There is no need for a backing plate and the it looks good.
>  
> I could take a picture of mount and TV today when I go down to do our beer can races.
> Please send me your email address off list and I will send the pictures from my iphone.
>  
> nadowayne at yahoo.com
>  
> Wayne Strickland
> Wayne's World (1999 number 594)
> 
> 
> --- On Tue, 5/19/09, Richard A. Walker <dickwalker at att.net> wrote:
> 
> 
> From: Richard A. Walker <dickwalker at att.net>
> Subject: Re: [C320-list] TV Mount
> To: C320-List at Catalina320.com
> Date: Tuesday, May 19, 2009, 5:40 PM
> 
> 
> I just mounted it fixed to the bulkhead.  It is fine.
> 
> Cheers,
>  
> Dick Walker
> C-320 (687) WindWalker II
> 740 Olive Ave.
> Coronado, CA 92118-2136
> 619.435.8986
> 
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Quentin Murphy
> Sent: Tuesday, May 19, 2009 5:08 PM
> To: C320-List at Catalina320. com
> Subject: [C320-list] TV Mount
> 
> I purchased a 19" LCD TV/DVD and a swing-arm mounting bracket.  I plan to
> install it on the bulkhead against the head so that the TV can be viewed
> from wither settee.  The back plate of this bracket is about 8" x 8" with
> four holes.  Originally I was going to drill four holes through the bulkhead
> which I understand to be two fibreglass panels and use stainless bolts,
> washers and nuts to mount.  However, I'm concerned with the boat heaving in
> the waves and the swing-arm essentially adding leverage, thus weight on
> these bolts which could tear through the bulkhead.  I noticed in an article
> for another boat suggesting using a stainless steel backing plate on the
> other (head) side.  I guess this would have to be custom made at a metal
> shop.  Is this additional plate inside the head necessary?  Has anyone
> install a TV on a swing-arm mount?
> 
> Quentin Murphy
> Celtic Knot #667
>   
> 
> 
> 
> 
>