[C320-list] BOMAR HATCH GASKETS

[Scott Thompson]

Just looking at the pictures of the hatches themselves on their website 
and comparing to my boat I would say lo profile matches my v-berth 
hatch, for what that's worth.

However, are you sure that what you need is the gasket as opposed to 
rebedding the hatch?  On my slightly older boat it is the caulk under 
the hatch frame that failed causing leaks.  I had good luck rebedding 
the entire hatch using Bomar's hatch mounting tape.  I also used this on 
the Lewmar hatches over the main salon and over the aft cabin berth.
-- 
Scott Thompson
Surprise, #653

grossnickle pete wrote:
> Dear 320 List Members
>  
> Thanks so much for all advice offered in past. 
> What a wonderful resource this list is.
>  
> Need to replace gaskets on two main hatchs.
>  
> Went to Bomar site.  They offer both lo and hi profile gaskets
> (P2000-25/26) at $5/foot.
>  
> Any suggestions?
>  
> Thanks again 
>  
> Pete  (n Jan) Grossnickle
> EL GATO
> #715
>  
> 
> 
>