[C320-list] Yanmar 3GM oil change tip
Dave Anderer
danderer at udel.edu
Mon Oct 12 06:13:16 PDT 2009
Outstanding! Thanks.
On Mon, Oct 12, 2009 at 8:55 AM, Jeff Hare <catalina at thehares.com> wrote:
> Hi,
>
> At a yanmar diesel class, the tech was asked about tips for changing the
> oil.
>
> He said, forget the tiny plastic tube down the dipstick hole. "Takes
> forever, and won't drain out all the oil because it bends all over".
>
> Instead get a foot long piece of 1/4 inch OD (outside diameter) copper tube
> like. Put a small V notch on the end and put that end in the dipstick hole.
> It will go straight to the deepest point in the oil pan and will allow a
> lot more oil to flow. Mate the copper tube with a 1/4" ID plastic tube.
>
> On some other yanmar models the dipstick tube already does this and all you
> need to do is choose a plastic drain tube that fits OVER the dipstick tube
> and the oil can be drained.
>
> -Jeff
>
>
>
More information about the C320-list
mailing list