[C320-list] rub rail

[Jeff Hare]

Nick,  while the rub rail is out, use this opportunity to ensure that all the screws behind the rubber piece are snug and sealed. 

You could pick up a bottle of "Captn Tolleys Creeping Crack Sealer".  A drop or two on each screw head will wick in to the tiniest spaces and seal the screws.  (Great stuff btw). 

-Jeff  


------Original Message------
From: Chuck and Kathy
Sender: c320-list-bounces at lists.catalina320.com
To: c320-list at lists.catalina320.com
ReplyTo: C320-List at Catalina320.com
Subject: Re: [C320-list] rub rail
Sent: Oct 23, 2009 7:09 PM

Nick:  I replaced my rub rail two years ago.  I ordered the material from
Catalina Florida (727.544.6681).  I wanted to be sure to have enough, so
ordered 70 feet.  There was about 6 or 7 ft. left over.  Cost then was
$2/ft. plus shipping.  It is a relatively easy installation, but use a heat
gun to get the rub rail warm and soft before you insert it.

Chuck Mueller
Northwind #676


Date: Thu, 22 Oct 2009 16:13:14 -0400
From: "Nicholas Ward" <Nicholas_Ward at brown.edu>
To: <c320-list at lists.catalina320.com>
Subject: [C320-list] Rub rail
Message-ID: <005f01ca5354$15f4e650$0202fea9 at lsmaster.lifespan.org>
Content-Type: text/plain;	charset="us-ascii"

Ordering a new rub rail ( I believe mine was stolen!)  Does anyone know
the length?   Do I just get it from Catalina part dept?

Nick - Smelly Cat #1