[C320-list] peeling paint/blisters FW: C 320 #500 Bottom Job
Chris Descher
cdescher at cedtulsa.com
Fri Jun 4 13:55:41 PDT 2010
I should add that I fixed about $1000 worth of the blisters that I found. Maybe that's not bad for 12 years in the water.
Chris Descher
-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com]On Behalf Of Chris
Descher
Sent: Friday, June 04, 2010 3:51 PM
To: C320-List at Catalina320.com
Subject: [C320-list] peeling paint/blisters FW: C 320 #500 Bottom Job
FYI - thought that I'd add this.
Chris Descher
-----Original Message-----
From: Kent Nelson [mailto:Kent at catalinayachts.com]
Sent: Friday, November 20, 2009 6:30 PM
To: cdescher at cedtulsa.com
Subject: C 320 #500 Bottom Job
Chris,
There should not be any blisters, but if they are they are most likely cosmetic and forming between the gel coat and the protective vinylester barrier coat. I hope this helps.
Good Sailing,
Kent Nelson
Engineering Department
Catalina Yachts
21200 Victory Blvd.
Woodland Hills, CA 91367
(818) 884-7700 ext. 236
(818) 884-3810 Fax
kent at catalinayachts.com
www.catalinayachts.com
-----Original Message-----
From: cdescher at cedtulsa.com [mailto:cdescher at cedtulsa.com]
Sent: Friday, November 20, 2009 8:02 AM
To: Kent Nelson
Subject: Catalina Yachts Contact Us Form
First Name: Chris
Last Name: Descher
Address: 301 E. 21st Street
City: Tulsa
State: OK
Zip: 74114
Day Phone: 918-855-5528
Evening Phone:
Fax:
E-mail: cdescher at cedtulsa.com
Boat Model: 320
Hull: 500
Country: USA
Comments:
It's my understanding that a 1998 C320 should have the vinylester on the hull. I bought this boat a year ago. It's been in fresh water continuously since original commissioning. I'm getting ready to do the first bottom job. Do you have any ideas as to whether I should expect any blistering?
More information about the C320-list
mailing list