[C320-list] Re-attach Rub rail
argates2nd at comcast.net
argates2nd at comcast.net
Sun Jun 6 15:36:36 PDT 2010
John,
I did a similar repair 2 years ago. First, after removing the aft screw, I stretched the vinyl insert aft to take out the sag. Then I cut off the excess (2-3" or so), drilled a new hole for the screw, and used Silicone caulk whereever the insert was loose -- which was more than half of its length -- after cleaning out the old glue. A friend helped me by reinserting the vinyl bit by bit as I stretched it aft -- but it could probably also be done solo.. It is still good after 2+ years.
Rollie #182
----- Original Message -----
From: jpmesa at aol.com
To: C320-List at Catalina320.com
Sent: Sunday, June 6, 2010 12:05:55 PM GMT -05:00 US/Canada Eastern
Subject: [C320-list] Re-attach Rub rail
Our rub rail is coming loose in a few areas. It's still in good shape and it popped back in. But I was thinking about cleaning up the inside and maybe give that area a dab of Gorilla glue to hold it in place better. Has anyone done any minor repairs like this? Thanks, JOHN & BOBBI Holokai 2
More information about the C320-list
mailing list