[C320-list] ST 4000 Problems (reboot)

[jpmesa at aol.com]

Chris 
When you do get back to your boat I would love a copy of how to reboot the control head. Thanks, John  Holokai 2






-----Original Message-----
From: Chris Burti <clburti at gmail.com>
To: C320-List at catalina320.com
Sent: Tue, May 25, 2010 7:19 pm
Subject: Re: [C320-list] ST 4000 Problems


I wish I had read this before I went sailing today. We had the same problem
ewveral years back and the Raymarine tech told me how to reboot the control
ead...fixed the problem but the instructions are on the boat and I can't
et back for week.
On Tue, May 25, 2010 at 10:39 AM, mtpoodles <mtpoodles at atlanticbb.net>wrote:
> I very thoroughly checked the area around the fluxgate compass and there is
 nothing that could interfere with the compass.  I went through the dealer
 setup at the slip to reset as much as possible there and will do the compass
 deviation this weekend and hope that solves the problem.  The unit has
 worked flawlessly for 5 years and is much used.  I spoke to a surveyor who
 has a Catalina 380 on the same dock and he thinks it's the deviation.

 Marshall and Diane Lucas and
 The Merrythought Poodles
 U AG-I Merrythought Holly Holy CD, NA (Holly) at the Bridge
 UCH Merrythought Beach Boy (Rudee)
 Merrythought Abbey Road  NA (Abbey) at the Bridge
 Saphire Merrythought Makin A Splash (Madison)

 -----Original Message-----
 From: c320-list-bounces at lists.catalina320.com [mailto:
 c320-list-bounces at lists.catalina320.com] On Behalf Of bruceheyman at cox.net
 Sent: Saturday, May 22, 2010 4:57 PM
 To: Catalina List
 Subject: Re: [C320-list] ST 4000 Problems

 Any chance your tool box is on the sole right above where your flux gate
 compass is mounted?  If so, I've been there done that.  Worked much better
 when I moved all the metal away from the flux gate.
 Bruce
 Somerset 671 SoCsl
 ------Original Message------
 From: MARSHALL M LUCAS
 Sender: c320-list-bounces at lists.catalina320.com
 To: Catalina List
 ReplyTo: Catalina List
 Subject: [C320-list] ST 4000 Problems
 Sent: May 22, 2010 13:41

 ?
 Had the shakedown sail today and while all other systems are fine, the
 autopilot seems to have lost its mind.  LOL

 Despite repeated setup attempts using the Raymarine setup directions, the
 heading continues to be incorrect.  The heading displayed is no more than
 10-15 degrees from the heading setting on the last setup.  For example, go
 through the process to align the autopilot with the Ritchie compass.  Enter
 a setting of 90 degrees which appears to be saved.  Change course to 270
 degrees per Ritchie compass but the Raymarine still had a heading of 90
 degrees.

 Comments/Suggestions??

 Thanks!

 Marshall and Diane and
 The Merrythought Poodles
 Merrythought Hull 1037


 Sent via BlackBerry by AT&T




- 
hris Burti Farmville, NC