[C320-list] Oil change
Jeff Hare
catalina at thehares.com
Fri Oct 22 11:40:25 PDT 2010
I use the Oil Boy pump and it works OK. I imagine most pumps will work just fine with the copper tube trick.
-Jeff
-----Original Message-----
From: BAdams3491 at aol.com
Sender: c320-list-bounces at lists.catalina320.com
Date: Fri, 22 Oct 2010 14:29:29
To: <C320-List at Catalina320.com>
Reply-To: C320-List at Catalina320.com
Subject: Re: [C320-list] Oil change
These pumps are manual, but if you insure all the fittings are tight, they
work well...plus they have finally come out with a smaller and cheaper
version:
_http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?productI
d=330596&catalogId=10001&langId=-1&storeId=11151&storeNum=10106&subdeptNum=1
0434&classNum=10440_
(http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?productId=330596&catalogId=10001&langId=-1&storeId=11151&storeN
um=10106&subdeptNum=10434&classNum=10440)
Bert
At Ease
#442
In a message dated 10/22/2010 1:24:08 P.M. Central Daylight Time,
ericstillwellevans at gmail.com writes:
Jack
I used a hand pump for the last 2 yrs and yes was a complete mess.
Hoping to get the diameter for the copper tube because that seemed to be
the biggest problem I found.
Rick
724
Sent via BlackBerry from T-Mobile
-----Original Message-----
From: "Jack McDonough" <mcdonough5 at verizon.net>
Sender: c320-list-bounces at lists.catalina320.comDate: Fri, 22 Oct 2010
13:52:52
To: <C320-List at Catalina320.com>
Reply-To: C320-List at Catalina320.com
Subject: Re: [C320-list] Oil change
Rick:
Good luck with the drill-powered pump. I used to use the Par hand pump,
which was always messy. I got more oil on me than in the jug.
jack
#947
----- Original Message -----
From: <ericstillwellevans at gmail.com>
To: <C320-List at Catalina320.com>
Sent: Friday, October 22, 2010 1:16 PM
Subject: Re: [C320-list] Oil change
> Jack
>
> After hand pumping for years (miserable process) I just bought a hand
> drill powered pump.
>
> I am doing my change on sunday and will let you know how it goes.
>
> Rick
> 724
> ------Original Message------
> From: Jack McDonough
> Sender: c320-list-bounces at lists.catalina320.com
> To: C320-List at Catalina320.com
> ReplyTo: C320-List at Catalina320.com
> Subject: [C320-list] Oil change
> Sent: Oct 22, 2010 12:55 PM
>
>
> I suppose everyone has figured out his/her own system for extracting oil
> from the Yanmar diesel. But, for what it's worth ...
>
> This fall I bought a 2.9 quart Outboard Motor Oil Extractor from West
> Marine. Although it's designed for outboards, there didn't seem to me to
> be any reason it wouldn't work on my 3GM30F. And there isn't any reason.
> It works like a charm.
>
> Jack
> #914
>
>
> Sent via BlackBerry from T-Mobile
More information about the C320-list
mailing list