[C320-list] Is anyone else.....

[Christopher Nichols]

We have a sunbrella padded cover that clips to press studs inside and out. It just hangs from the internal ones when the washboards are in place.

Chris Nichols

On Aug 8, 2011, at 5:20 AM, "Stephane Rousseau _/)" <stephaner at gmail.com> wrote:

> Me too,
> 
> I did put a couple of lines of rigging tape over the sharp edge since then
> no more shin cutted :-)
> 
> Wedidit II hull 544
> Steph _/)
> 
> 
> 2011/8/7 Welch, Myron D <myron-welch at uiowa.edu>
> 
>> Brad,
>> 
>> I used to cut my shin on the piece of stainless moulding on the top of the
>> companionway entrance. I loosened the screws, slit a piece of 1/8 clear
>> tubing, slid it over the sharp edge and tightened it down. It has not moved
>> in 12 years and no more shin damage. Hope this helps.
>> 
>> Myron Welch
>> Wind Instrument #238
>> Iowa City, Iowa
>> 
>> Sent from my iPod Touch
>> 
>> On Aug 7, 2011, at 8:57 PM, "Jane & Ken" <obuoy4848 at sbcglobal.net> wrote:
>> 
>>> Brad,
>>> We refer to those as boat bites--If you are a real sailor, you will have
>> them--congrats.
>>> 
>>> --- On Sun, 8/7/11, Brad Kuether <bkuether at comcast.net> wrote:
>>> 
>>> 
>>> From: Brad Kuether <bkuether at comcast.net>
>>> Subject: [C320-list] Is anyone else.....
>>> To: C320-List at Catalina320.com
>>> Date: Sunday, August 7, 2011, 6:57 PM
>>> 
>>> 
>>> Coming home with busted up shins after traversing the companionway?
>>> 
>>> I don't know what it is, but every time I go out.......
>>> 
>>> -Brad, Mary, Monica, and Jarod
>>> "Independence"
>>> 2004 Catalina 320 Hull 1006
>>> Middle River, MD
>>