[C320-list] documentation

uhlman at sbcglobal.net uhlman at sbcglobal.net
Sat Aug 13 09:38:03 PDT 2011


Sme here with name and port.  Uscg requires city and state. Doc. Number on inside lid of port cockpit locker.  
Barb
Sent on the Sprint® Now Network from my BlackBerry®

-----Original Message-----
From: "Brian/Carol McLamb" <bjcnmclamb at gmail.com>
Sender: c320-list-bounces at lists.catalina320.comDate: Sat, 13 Aug 2011 12:33:18 
To: <C320-List at catalina320.com>
Reply-To: C320-List at Catalina320.com
Subject: Re: [C320-list] documentation

I put mine on interior, under the companion way.  Once in the salon area
looking above the engine box through the steps the number is clearly
visible.  So far no problems!  I too have the vessel name on port and
starboard stern quarter with the homeport on the transom.  Again, no
problems.  USCG patrols eastern NC regularly and I have had no challanges.
Even around the port of Morehead City when the Marines are loading
transports.  Brian s/v Serenity # 1075

On Sat, Aug 13, 2011 at 12:05 PM, <Aqua5Len at gmail.com> wrote:

> WHEN YOUR BOAT IS COAST GUARD REGISTERED YOU DON'T PUT NUMBERS ON BOAT.
>
> LEN
> AQUA5
> MARINA DEL REY, CA
>
>
> On , jim brown <jbrown5093 at yahoo.com> wrote:
>
>> Curious as to where people have put the required numbers on a documented
>> vessel. Also, has anyone had problems with the vessel ame on the port and
>> starboard hull and the home port on the stern? The requirement is that they
>> be in the same place.
>>
>
>
>
>
>
>  Jim Brown
>>
>
>
>
>
>
>
>
>  ______________________________**__
>>
>
>  From: Guy Henry guyhenry22 at aol.com>
>>
>
>  To: C320-List at catalina320.com
>>
>
>  Sent: Friday, August 12, 2011 9:41 AM
>>
>
>  Subject: Re: [C320-list] Is anyone else.....
>>
>
>
>
>  A simple strip of white electrical tape calms the beast.
>>
>
>
>
>  Guy
>>
>
>  MoonShadow #115
>>
>
>
>
>  On Aug 10, 2011 2:01 PM, "pat reynolds" lorasalum at yahoo.com> wrote:
>>
>
>  removed the shin shreader long ago and put a strip of teak there instead
>>
>
>
>
>
>
>  From: John Frost john at frostnet.net>
>>
>
>  To: "C320-List at Catalina320.com"
>>
>
>  Cc: ""
>>
>
>  Sent: Wednesday, August 10, 2011 10:11 AM
>>
>
>
>
>  Subject: Re: [C320-list] Is anyone else.....
>>
>
>
>
>  On my boat it is caused by the stainless steel wear pad being mounted with
>> a
>>
>
>  slight overhang on the ...
>>
>
>
>


More information about the C320-list mailing list