[C320-list] Shower Sump Pump

[Irving Grunes]

Remember there is a screen filter under that pump sumtimes clogs the input
pipe below the screen after the screen is removed.
Check that.
Irv 851
On Aug 24, 2011 8:40 AM, "Jason Alexander" <alexander.jason at gmail.com>
wrote:
> I just replaced mine. The motor would run but the pump wouldn't
> pump. When I got to looking at the rebuild parts it was almost as
> cheap to replace the whole pump so that's what I did. It take some
> squrming around but it can be done.
>
> Jason
>
> On Tue, Aug 23, 2011 at 9:41 AM, Mike Ott <wmo48 at yahoo.com> wrote:
>> I fried the pump our 1st season, forgot to open the seacock.  The pump
was easy
>> to replace and not as awkward as I thought it would be to get at.
Replacement
>> was a Jabsco 37202-2.
>> Mike
>> "Amanda Lu"
>> #508
>>
>>
>>
>>
>> ________________________________
>> From: Donald Lawson <dnclaws at aol.com>
>> To: C320-List at Catalina320.com
>> Sent: Mon, August 22, 2011 7:28:58 PM
>> Subject: [C320-list] Shower Sump Pump
>>
>> I performed a routine check on systems this week getting ready for a long
>> cruise. The shower sump pump did not turn on. I am getting power from the
switch
>> in the head to the pump.  Switch is fine.  My next move is to check the
>> connection at the pump. In the event the connection is fine  I will have
to
>> remove the pump. Has anyone removed and rebuilt the pump? I am not
looking
>> forward to working under the sink through that little door.
>>
>> Don Lawson #1005
>>