[C320-list] Shower Sump Pump
Jason Alexander
alexander.jason at gmail.com
Wed Aug 24 08:55:37 PDT 2011
Yea that was my first though. I removed the hose from the output
side of the screen and put the hose in a glass of clean water. It
still wouldn't draw up water. The new pump fixed me good.
Jason
On Wed, Aug 24, 2011 at 9:16 AM, Irving Grunes <igrunes at gmail.com> wrote:
> Remember there is a screen filter under that pump sumtimes clogs the input
> pipe below the screen after the screen is removed.
> Check that.
> Irv 851
> On Aug 24, 2011 8:40 AM, "Jason Alexander" <alexander.jason at gmail.com>
> wrote:
>> I just replaced mine. The motor would run but the pump wouldn't
>> pump. When I got to looking at the rebuild parts it was almost as
>> cheap to replace the whole pump so that's what I did. It take some
>> squrming around but it can be done.
>>
>> Jason
>>
>> On Tue, Aug 23, 2011 at 9:41 AM, Mike Ott <wmo48 at yahoo.com> wrote:
>>> I fried the pump our 1st season, forgot to open the seacock. The pump
> was easy
>>> to replace and not as awkward as I thought it would be to get at.
> Replacement
>>> was a Jabsco 37202-2.
>>> Mike
>>> "Amanda Lu"
>>> #508
>>>
>>>
>>>
>>>
>>> ________________________________
>>> From: Donald Lawson <dnclaws at aol.com>
>>> To: C320-List at Catalina320.com
>>> Sent: Mon, August 22, 2011 7:28:58 PM
>>> Subject: [C320-list] Shower Sump Pump
>>>
>>> I performed a routine check on systems this week getting ready for a long
>>> cruise. The shower sump pump did not turn on. I am getting power from the
> switch
>>> in the head to the pump. Switch is fine. My next move is to check the
>>> connection at the pump. In the event the connection is fine I will have
> to
>>> remove the pump. Has anyone removed and rebuilt the pump? I am not
> looking
>>> forward to working under the sink through that little door.
>>>
>>> Don Lawson #1005
>>>
>
More information about the C320-list
mailing list