[C320-list] Airmar CS4500 replacement for speed paddlewheel?
Jeff Hare
catalina at thehares.com
Wed Jun 22 15:00:34 PDT 2011
Yes, the temp scan be calibrated.
See the ST60 Speed instrument Owner's Handbook
(Or download a pdf copy from www.RayMarine.com)
Take a thermometer and measure the water temp about 4' down, then go into calibration mode on the speed unit and adjust the displayed temp to match.
Jeff
wflowe3 at aim.com wrote:
Thisis off the subject but since you mentioned temperature readings, isthat a function that can be celebrated? According to mine, our lakehas not been below 120 degrees for three years. I think it may be wrong.
Bill
#1146
-----Original Message-----
From: Jeff Hare <catalina at thehares.com>
To: C320-List <C320-List at Catalina320.com>
Sent: Tue, Jun 21, 2011 3:46 pm
Subject: [C320-list] Airmar CS4500 replacement for speed paddlewheel?
Hello,
My speed sender seems to have died. Still getting temp readings but no speed.
I read from raymarine's website that the airmar cs4500 ultrasonic speed
transducer is compatible with the st60 (and others) .
Has anyone done this swap? The only comment I read regarding replacement
compatability was that the st40 thruhull fitting was too long. So is the st60
thruhull a direct fit?
I suspect the paddlewheel version is also made by airmar?
Sure would be nice to not have to mess with clogged paddlewheels.
-jeff
More information about the C320-list
mailing list