[C320-list] C320-list Digest, frig gasket
John Phillippe
phillippe443 at frontier.com
Tue May 17 21:26:26 PDT 2011
I just installed (today), a new gasket from B.A.Refrigeration. It is grey
rubber, Custom Gasket Profile 2396. I bought 2-8' lengths. You'll have to
miter the corners. I would recommend 5/8" by 5/8". I ordered 3/4" by 5/8"
and had to trim 1/16'' off width. This real frig gasket! Go to B.A.
Gasket.com or phone 1-800-695-7929. They usually make the gasket corners as
a custom piece.
Be firm and patient and they will send you the gasket. Two 8' section with
shipping to IL was $28.17.
John
No Worries
On 5/17/11 2:00 PM, "c320-list-request at lists.catalina320.com"
<c320-list-request at lists.catalina320.com> wrote:
> Send C320-list mailing list submissions to
> c320-list at lists.catalina320.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.catalina320.com/listinfo.cgi/c320-list-catalina320.com
> or, via email, send a message with subject or body 'help' to
> c320-list-request at lists.catalina320.com
>
> You can reach the person managing the list at
> c320-list-owner at lists.catalina320.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of C320-list digest..."
>
>
> Today's Topics:
>
> 1. Re: Wind Speed Transponder (Irving Grunes)
> 2. ice box gasket (Chris Descher)
> 3. Re: ice box gasket (hcreech at comcast.net)
> 4. Re: ice box gasket (Chris Descher)
> 5. Re: ice box gasket (Jane & Ken)
> 6. Re: ice box gasket (Donald Lawson)
> 7. Re: ice box gasket (hcreech at comcast.net)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 16 May 2011 22:25:19 -0400
> From: Irving Grunes <igrunes at gmail.com>
> To: C320-List at catalina320.com
> Subject: Re: [C320-list] Wind Speed Transponder
> Message-ID: <BANLkTikduLj8smi2iQECkLtk4Y9-Eo3uSQ at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Can't locate the email re dunking the transponder in WD40
>
> 1. What size Allan Wrench to remove cups and vane
>
> 2. Approximately what size container will be needed to dunk the transponder/
> Will a gallon milk jug cut off at 3 to four inches high be big enough?
> 3, How much WD40 did you use for the dunking?
> Irv
> 2001 #851
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 17 May 2011 08:28:49 -0500
> From: "Chris Descher" <cdescher at cedtulsa.com>
> To: <C320-List at Catalina320.com>
> Subject: [C320-list] ice box gasket
> Message-ID: <AKEBKJHDOPMEGDILPFCEAEMFFDAA.cdescher at cedtulsa.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Does anyone have a source for the 1/2" foam gasketing material that's
> installed around the trim of the icebox? Mine's in bad shape and needs to
> be replaced, and I haven't found anything available that's quite like it.
>
> Thanks,
>
> Chris Descher
> #500
>
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 17 May 2011 13:41:26 +0000 (UTC)
> From: hcreech at comcast.net
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] ice box gasket
> Message-ID:
> <1341453541.826850.1305639686772.JavaMail.root at sz0074a.westchester.pa.mail.com
> cast.net>
>
> Content-Type: text/plain; charset=utf-8
>
> Chris,
> I got mine from Catalina. They no longer make the black, now comes only in
> white. Looks much cleaner than the black. The foam has an adhesive side that
> you peel the cover off before applying, I did mine two years ago and frankly
> the adhesive is not very good, most fall off now. My next trip to the hardware
> store will be to discover an adhesive that will hold but is removable for
> cleaning because the outsides get cruddy and there is no way to clean properly
> without removing.
>
> Herb Creech
> Cloud Chaser 606
>
>
>
> ----- Original Message -----
> From: "Chris Descher" <cdescher at cedtulsa.com>
> To: C320-List at Catalina320.com
> Sent: Tuesday, May 17, 2011 9:28:49 AM
> Subject: [C320-list] ice box gasket
>
> Does anyone have a source for the 1/2" foam gasketing material that's
> installed around the trim of the icebox? Mine's in bad shape and needs to
> be replaced, and I haven't found anything available that's quite like it.
>
> Thanks,
>
> Chris Descher
> #500
>
>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 17 May 2011 08:37:49 -0500
> From: "Chris Descher" <cdescher at cedtulsa.com>
> To: <C320-List at Catalina320.com>
> Subject: Re: [C320-list] ice box gasket
> Message-ID: <AKEBKJHDOPMEGDILPFCEKEMFFDAA.cdescher at cedtulsa.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Thanks. Same problem I'm having - bad adhesive and growing a black mold.
>
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com]On Behalf Of
> hcreech at comcast.net
> Sent: Tuesday, May 17, 2011 8:41 AM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] ice box gasket
>
>
> Chris,
> I got mine from Catalina. They no longer make the black, now comes only in
> white. Looks much cleaner than the black. The foam has an adhesive side that
> you peel the cover off before applying, I did mine two years ago and frankly
> the adhesive is not very good, most fall off now. My next trip to the hardware
> store will be to discover an adhesive that will hold but is removable for
> cleaning because the outsides get cruddy and there is no way to clean properly
> without removing.
>
> Herb Creech
> Cloud Chaser 606
>
>
>
> ----- Original Message -----
> From: "Chris Descher" <cdescher at cedtulsa.com>
> To: C320-List at Catalina320.com
> Sent: Tuesday, May 17, 2011 9:28:49 AM
> Subject: [C320-list] ice box gasket
>
> Does anyone have a source for the 1/2" foam gasketing material that's
> installed around the trim of the icebox? Mine's in bad shape and needs to
> be replaced, and I haven't found anything available that's quite like it.
>
> Thanks,
>
> Chris Descher
> #500
>
>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 17 May 2011 06:44:51 -0700 (PDT)
> From: Jane & Ken <obuoy4848 at sbcglobal.net>
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] ice box gasket
> Message-ID: <854184.77565.qm at web82606.mail.mud.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Chris, I replaced the gasket on hull #219 several years ago with the product
> Catalina was then using--give them a call and see if they won't be able to
> help you.? Actually any refrigeration company should be able to help. Just be
> certain you get the old adhesive cleaned really good--Don't ask how I know,
> grin. Ken, OBUOY #219
>
> --- On Tue, 5/17/11, Chris Descher <cdescher at cedtulsa.com> wrote:
>
>
> From: Chris Descher <cdescher at cedtulsa.com>
> Subject: [C320-list] ice box gasket
> To: C320-List at Catalina320.com
> Date: Tuesday, May 17, 2011, 8:28 AM
>
>
> Does anyone have a source for the 1/2" foam gasketing material that's
> installed around the trim of the icebox?? Mine's in bad shape and needs to
> be replaced, and I haven't found anything available that's quite like it.
>
> Thanks,
>
> Chris Descher
> #500
>
>
>
> ------------------------------
>
> Message: 6
> Date: Tue, 17 May 2011 10:25:35 -0700
> From: Donald Lawson <dnclaws at aol.com>
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] ice box gasket
> Message-ID: <EDBF77C4-1D7C-4C4F-9605-283A36D7B1DF at aol.com>
> Content-Type: text/plain; charset=us-ascii
>
> Have you tried McMaster-Carr?
> Don Lawson
> #1005
>
> On May 17, 2011, at 6:28 AM, Chris Descher wrote:
>
>> Does anyone have a source for the 1/2" foam gasketing material that's
>> installed around the trim of the icebox? Mine's in bad shape and needs to
>> be replaced, and I haven't found anything available that's quite like it.
>>
>> Thanks,
>>
>> Chris Descher
>> #500
>>
>
>
>
> ------------------------------
>
> Message: 7
> Date: Tue, 17 May 2011 18:47:30 +0000 (UTC)
> From: hcreech at comcast.net
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] ice box gasket
> Message-ID:
> <755910987.850884.1305658050720.JavaMail.root at sz0074a.westchester.pa.mail.comc
> ast.net>
>
> Content-Type: text/plain; charset=utf-8
>
> Chris,
> I remove them occasionally and spray with Clorox Cleanup, a product I believe
> to be essential on my boat, really keeps them clean an white. But I wish there
> was a better solution. Replacing the original black with white I thought was
> an improvement, but proper cleaning requires removing and not having them
> properly glued in is not good. Still looking for a better solution, if I find
> I will report.
>
> Herb
>
>
>
> ----- Original Message -----
> From: "Chris Descher " < cdescher @ cedtulsa .com>
> To: C320-List at Catalina320.com
> Sent: Tuesday, May 17, 2011 9:37:49 AM
> Subject: Re: [C320-list] ice box gasket
>
> Thanks. Same problem I'm having - bad adhesive and growing a black mold.
>
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [ mailto :c320-list-bounces at lists.catalina320.com]On Behalf Of
> hcreech @comcast.net
> Sent: Tuesday, May 17, 2011 8:41 AM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] ice box gasket
>
>
> Chris,
> I got mine from Catalina. They no longer make the black, now comes only in
> white. Looks much cleaner than the black. The foam has an adhesive side that
> you peel the cover off before applying, I did mine two years ago and frankly
> the adhesive is not very good, most fall off now. My next trip to the hardware
> store will be to discover an adhesive that will hold but is removable for
> cleaning because the outsides get cruddy and there is no way to clean properly
> without removing.
>
> Herb Creech
> Cloud Chaser 606
>
>
>
> ----- Original Message -----
> From: "Chris Descher " < cdescher @ cedtulsa .com>
> To: C320-List at Catalina320.com
> Sent: Tuesday, May 17, 2011 9:28:49 AM
> Subject: [C320-list] ice box gasket
>
> Does anyone have a source for the 1/2" foam gasketing material that's
> installed around the trim of the icebox? Mine's in bad shape and needs to
> be replaced, and I haven't found anything available that's quite like it.
>
> Thanks,
>
> Chris Descher
> #500
>
>
>
> End of C320-list Digest, Vol 1113, Issue 1
> ******************************************
More information about the C320-list
mailing list