[C320-list] Has anyone had a Meg Test done on their Shore Power
Annie Bennett
annie at sydneyprivatesailing.com.au
Mon May 2 15:11:34 PDT 2011
Thanks to all who've replied on this. Much appreciated. Will let you know how it goes! Annie
On 02/05/2011, at 11:09 PM, Stephen Cox wrote:
>
>>> "it is a test where you have a meg tester that sends 30000
>> volts down a power line and tests the cables continuity , ohm
>> and corrosion thru a given circuit. It also check for earth
>> or cable breakages.
>>>
>>> This test is usually done on power tools and industrial
>> equipment then signed off as being acceptable to use.
>>>
>
> Annie,
>
> I suspect he meant 3,000v rather than 30,000v. It's (the lower) a pretty
> standard test for mains wiring in Australia to show that the insulation and
> the installation are all up to par.
>
> You would need to advise the electrician doing the test of the galvanic
> isolator fitted to the boat (little box in port lazarette that the mains
> earth wire from back of shore connection socket goes through on way to main
> circuit breaker also in port lazarette). It may not be rated highly enough
> to survive this test. Also make sure the battery charger circuit breaker is
> definitely off.
>
> Stephen Cox
> Tegwen 1141
>
>
More information about the C320-list
mailing list