[C320-list] ST50 Speed and Wind
pat reynolds
lorasalum at yahoo.com
Sun May 15 12:43:56 PDT 2011
My 1995 has a plug attached to the knot meter. Pull the transduser and put in
the plug in one motion. if you have no flap someone must have removed the plug
if a used boat
----- Original Message ----
From: Jason Alexander <alexander.jason at gmail.com>
To: "C320-List at Catalina320.com" <C320-List at Catalina320.com>
Sent: Thu, May 12, 2011 5:49:04 PM
Subject: [C320-list] ST50 Speed and Wind
Hi all,
Got a couple issues with my ST50 gear on my boat. First the speed sensor. This
past weekend I was having some issues with speed sensor running slow. Seeing
that it was working just fine when I put it back in the water a few weeks I
figured that I would just pull it and see if it was fouled. So I pulled the
hatch board and unscrewed the sensor and pulled it from the hull and I was
surprised by a 2 foot gusher coming up at my face. Isn't there supposed to be a
flap to slow the water. If not how is the best way to keep the flooding to a
minimum.
Second my wind speed sensor seems to be sticking. If the wind is light it
doesn't spin. Is there some user maintenance I can do. If not will a ST60
sensor connect to the mast head connector. I already have to ST60 heads at the
pedestal so calibration won't be an issue.
Thanks
Jason
More information about the C320-list
mailing list