[C320-list] ice box gasket

[Bryan]

What if the gaskets were glued to the lids instead of the box edges?

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of hcreech at comcast.net
Sent: Tuesday, May 17, 2011 1:48 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] ice box gasket

Chris,
I remove them occasionally and spray with Clorox Cleanup, a product I believe to be essential on my boat, really keeps them clean an white. But I wish there was a better solution. Replacing the original black with white I thought was an improvement, but proper cleaning requires removing and not having them properly glued in is not good. Still looking for a better solution, if I find I will report. 

Herb 



----- Original Message -----
From: "Chris Descher " < cdescher @ cedtulsa .com>
To: C320-List at Catalina320.com
Sent: Tuesday, May 17, 2011 9:37:49 AM
Subject: Re: [C320-list] ice box gasket 

Thanks. Same problem I'm having - bad adhesive and growing a black mold. 

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[ mailto :c320-list-bounces at lists.catalina320.com]On Behalf Of hcreech @comcast.net
Sent: Tuesday, May 17, 2011 8:41 AM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] ice box gasket 


Chris,
I got mine from Catalina. They no longer make the black, now comes only in white. Looks much cleaner than the black. The foam has an adhesive side that you peel the cover off before applying, I did mine two years ago and frankly the adhesive is not very good, most fall off now. My next trip to the hardware store will be to discover an adhesive that will hold but is removable for cleaning because the outsides get cruddy and there is no way to clean properly without removing. 

Herb Creech
Cloud Chaser 606 



----- Original Message ----- 
From: "Chris Descher " < cdescher @ cedtulsa .com> 
To: C320-List at Catalina320.com 
Sent: Tuesday, May 17, 2011 9:28:49 AM 
Subject: [C320-list] ice box gasket 

Does anyone have a source for the 1/2" foam gasketing material that's 
installed around the trim of the icebox? Mine's in bad shape and needs to 
be replaced, and I haven't found anything available that's quite like it. 

Thanks, 

Chris Descher 
#500