[C320-list] ice box gasket

[Chris Burti]

When mine came loose, I was told to use contact cement...it worked.

On Tue, May 17, 2011 at 3:14 PM, Bryan <bcampbell at valp.net> wrote:
> What if the gaskets were glued to the lids instead of the box edges?
>
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of hcreech at comcast.net
> Sent: Tuesday, May 17, 2011 1:48 PM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] ice box gasket
>
> Chris,
> I remove them occasionally and spray with Clorox Cleanup, a product I believe to be essential on my boat, really keeps them clean an white. But I wish there was a better solution. Replacing the original black with white I thought was an improvement, but proper cleaning requires removing and not having them properly glued in is not good. Still looking for a better solution, if I find I will report.
>
> Herb
>
>
>
> ----- Original Message -----
> From: "Chris Descher " < cdescher @ cedtulsa .com>
> To: C320-List at Catalina320.com
> Sent: Tuesday, May 17, 2011 9:37:49 AM
> Subject: Re: [C320-list] ice box gasket
>
> Thanks. Same problem I'm having - bad adhesive and growing a black mold.
>
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [ mailto :c320-list-bounces at lists.catalina320.com]On Behalf Of hcreech @comcast.net
> Sent: Tuesday, May 17, 2011 8:41 AM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] ice box gasket
>
>
> Chris,
> I got mine from Catalina. They no longer make the black, now comes only in white. Looks much cleaner than the black. The foam has an adhesive side that you peel the cover off before applying, I did mine two years ago and frankly the adhesive is not very good, most fall off now. My next trip to the hardware store will be to discover an adhesive that will hold but is removable for cleaning because the outsides get cruddy and there is no way to clean properly without removing.
>
> Herb Creech
> Cloud Chaser 606
>
>
>
> ----- Original Message -----
> From: "Chris Descher " < cdescher @ cedtulsa .com>
> To: C320-List at Catalina320.com
> Sent: Tuesday, May 17, 2011 9:28:49 AM
> Subject: [C320-list] ice box gasket
>
> Does anyone have a source for the 1/2" foam gasketing material that's
> installed around the trim of the icebox? Mine's in bad shape and needs to
> be replaced, and I haven't found anything available that's quite like it.
>
> Thanks,
>
> Chris Descher
> #500
>
>



-- 
Chris Burti
Farmville, NC