[C320-list] Ice Box gasket

[jim brown]

goof off or one of those solvents will remove the adhesive (after a while) I wet a paper towel and let it sit on the dried goop for about 15 min and it came off pretty easily by using a credit card as a scraper. It did not damage the gelcoat. I have experimented with putting the new gasket material (mine also looks like #9) on the lids but didn't seem to make a lot of difference. 


Jim B



________________________________
From: Denny Browne <dennybrowne at verizon.net>
To: C320-List at Catalina320.com
Sent: Thursday, October 27, 2011 10:36 PM
Subject: Re: [C320-list] Ice Box gasket

Style 9 looks like the one on my boat. Silicone 3/4" x 9/16". Anyone know
how to get the dried adhesive off and what to replace it with? The seal has
become unstuck, and falls into the fridge every time I open the lid.

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Mark
Gillingham
Sent: Thursday, October 27, 2011 1:34 PM
To: C320-List at catalina320.com
Subject: Re: [C320-list] Ice Box gasket

I'm looking for gasket material too. Would something like number 4 or number
10 on this
page<http://www.mcmaster.com/#foam-rubber-bulb-seal-gaskets/=eodoj0>
do?

Mark
Speakeasy #612