[C320-list] Anchor roller bail
dprudden
dprudden at comcast.net
Sat Dec 1 10:08:25 PST 2012
Tony,
Thanks for the pic. The 25# does look big. From everything I read, most people said to go up 1 size from the manufacturers recommendations. From reading the posts, I thought most owners went with the 35 instead of the recommended 25.....am I way off base here? Should I tell Santa that bigger isn't better in this case?
David Prudden
#787
Sent from my iPhone
On Dec 1, 2012, at 12:56 PM, Tony Murphy <tony at midwestphysics.com> wrote:
> I went with the 25# Manson Supreme also… 1 season of use and not even a hint of dragging. I HIGHLY recommend this style anchor or the similar Mantus Anchor (which is take apart if you need to store it in the case of a backup anchor). This anchor, because of it's design, appears quite large on the bow roller. The 35# will definitely look like quite the appendage on your bow. I can guarantee people will get out of your way if you're headed toward them, regardless of which tack you're on!!
>
> I removed the existing bail, placed the anchor and measured what I would need for replacement. Unfortunately, I didn’t' save the measurements, and can't find my order receipt. And since the boat is 2 hrs away and I wont' see it before March/April, I can only guess at this point.
>
> I think it was BB-2 on the following Garhauer page.. http://garhauermarine.com/catalog_process.cfm?cid=73 (price was definitely right at < $10, considering West Marine had options for $50+… crazy!!)
>
> Of course, this is with my 25#, and because of the way the curved shank sits on the roller, I didn't get a perfect fit with the one I ordered. Since you're going with the 35#, it sounds like you will have to measure yourself unless someone else chimes in soon.
>
> I have a photo on Flickr of the anchor before I replaced the Bail… http://flic.kr/p/dxKZxG
>
> Tony Murphy
> Bella Sol
> #886
>
>
>
> On Dec 1, 2012, at 9:20 AM, Mike Ott <wmo48 at yahoo.com> wrote:
>
>> Apparently you have been good this year !
>> We have a 25# Manson and love it. It grabs right away and digs right in. We
>> have never had an anchor drag with this anchor. The only issue we have had is
>> that grabs too well. The first couple of times this happened I got worried
>> about having to dive on it to dig it out ( never had too). I started using the
>> double shank element with a break-away cord, so if I had to I could pull it out
>> with the shackle right above the flukes.
>> The 25# will just fit under the existing bail but I need to get a larger one to
>> make it easier to get the shank over the roller. I am sure you need a larger
>> bail for the 35#, don't know by how much though.
>>
>> Mike Ott
>> 'Amanda Lu'
>> #508
>>
>>
>> ________________________________
>> From: "dprudden at comcast.net" <dprudden at comcast.net>
>> To: C320-list at catalina320.com
>> Sent: Fri, November 30, 2012 6:59:08 PM
>> Subject: [C320-list] Anchor roller bail
>>
>> Does anyone use a 35# Manson Supreme? Santa is bringing me one, and my
>> understanding from the discussion list and photos online is that I will need a
>> bigger bail on my bow roller. Does anyone know what size I will need?
>>
>>
>> Thanks!
>>
>> David Prudden
>> #787
>
More information about the C320-list
mailing list