[C320-list] Fuel strainer
Mike Paris
mparis495 at gmail.com
Thu Jan 26 08:49:06 PST 2012
Thanks Jeff. I didn't think tape was right for this. I'll get some Permatex.
Mike P
Sent from my iPhone
On Jan 25, 2012, at 2:07 PM, Jeff Hare <catalina at thehares.com> wrote:
> I recall being told not to use teflon tape but to use permatex or another thread sealant. I don't believe that teflon breaks down in diesel, but it shreads easily and tiny fragments could break away get into the fuel line. I guess this might only become an issue on the output side of the engine mounted secondary filter.
>
> That said, I believe my racor primary filter has teflon tape on the fittings from the factory.
>
> Our engine mounted filter looks like it has some paste sealant (like permatex).
>
> Jeff
>
> Mike Paris <mparis495 at gmail.com> wrote:
>
> I'm replacing the fuel strainer housing for the secondary filter because I stripped the bleed screw. Do I need to put teflon tape on the inlet and outlet lines when I put the new one in?
>
> Thanks,
> Mike P
> #734
>
> Sent from my iPhone
>
More information about the C320-list
mailing list