[C320-list] Bilge pump

[John Meyers]

I have almost the same problem as Jim. I don't need to do it yet, but my
1997 #406 has the access problem of the floor under the chart desk which is
between the seat and area under the galley drawers. There is no access. I
was thinking of cutting an access hole.

John M
Wind Chime

On Tue, Jul 10, 2012 at 9:18 AM, <wflowe3 at aim.com> wrote:

>
>  Do you actually sail on the Lake of the Ozarks? My boat is newer so I
> don't know if these suggestions apply. Remove the galley drawers and the
> frame that holds them in (6 screws). This exposes the hull under the sinks.
> remove the small drawer and its frame under the ice box area (4 screws) and
> this will expose the hull under there. That will break your fishing trip
> into short runs.
>
>
>
>
>
> -----Original Message-----
> From: Jim Pasley1 <paslej1 at charter.net>
> To: c320-list <c320-list at lists.catalina320.com>
> Sent: Tue, Jul 10, 2012 8:08 am
> Subject: [C320-list] Bilge pump
>
>
> The discharge hose from my electric bilge pump has blown out. I would like
> to
> replace the hose, but it runs from under the port couch in the salon, then
> under
> the floor of the galley and then to the back of the boat. No access under
> the
> galley floor. Any ideas on how to fish a new hose thru or reroute the line?
> Thanks. Dream Weaver, 2000 C320, Hull 691, Lake Ozark, Missouri.
>
>
>