[C320-list] Plastic Porthole screens

[Dingo Is Talent]

HAD the same problem
They do fit Mike but you need make the little tabs fit into the rubber seal
on the window..same with top bit.
Once you've done it a couple of times it makes sense
go here for a little note on how..


http://www.lewmar.com/products.asp?id=8682&channel=1

DINGO 
Down Under in Perth Western Australia.
HULL 1150 


-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of mike slade
Sent: Sunday, 15 July 2012 10:52 AM
To: C320-List at catalina320.com
Subject: Re: [C320-list] Plastic Porthole screens

On Sat, Jul 14, 2012 at 10:44 PM, mike Slade <mikeslade1435 at gmail.com>wrote:

> I bought my #803 C320 with plastic screens for the opening portholes.
>  Cannot figure them out.  They have two tiny tabs one long side 
> (either top or bottom) and a strip of plastic  on the other with a 
> second strip attached.  They are gray plastic and say "outside" on the 
> side with the attached second strip.  Anyone familiar with these.  The 
> hatch is Lewmar but there are No names on the portholes, which look 
> like original equipment, now 11 years old. Mike Slade, Imagine #803
>
>
> Sent from my iPhone