[C320-list] Adler/Barbour Troubleshooting Guide

[Karl Mielenhausen]

R134a is used in the Danfoss compressor on hull 690. Indicated by a blue label.

Caution.... if you plan on recharging, get someone who knows what they
are doing. I'm told that it is very easy to overcharge these units.

Karl

On Thu, May 3, 2012 at 7:50 AM, Flyingmonkey <lou at flyingmonkey.im> wrote:
> What type refrigerant does a 2000 model use?
>
> Thanks,
> Lou
> Blue Moon
>
>
> On May 1, 2012, at 12:04 PM, Karl Mielenhausen wrote:
>
>> Went to use my A/B refrigeration last week and nothing happened.
>>
>> Plenty of power at the unit and no fault indication from the
>> troubleshooting LEDs on the PC board.
>> I jumpered out the thermostat (inside the cold box) and still could
>> not get the unit to come on.
>>
>> Based upon what I read here and on other discussion lists, I was
>> expecting to replace the Danfoss control module.
>> I then got smart and called Adler/Barbour tech support (now Dometic)
>> for some advice.
>> I spoke to Jacob Prince (800-542-2477) who emailed me a troubleshooting guide.
>>
>> I followed it to the letter and found the problem to be with the
>> "trailer-style" connection for the thermostat. Something I overlooked
>> when I jumpered it out at the 'other end".
>> As they say in the instructions, you really need to take your jumper
>> all the way down to T and C on the DANFOSS module.
>>
>> I felt sure my module was shot.... glad it is not. This was an easy
>> fix and the Yuenglings are cold again!!
>>
>> The guide is now posted on our
>> website...http://www.catalina320.com/filemgmt/visit.php?lid=151
>>
>> Karl Mielenhausen
>>
>