[C320-list] Prop Shaft Install

[jim brown]

If it came out without removing the rudder shouldn't it go back in the same way? 


Jim Brown



________________________________
 From: Charles Greenwell <CGreenwell at sparusa.com>
To: c320-list at lists.catalina320.com 
Sent: Monday, May 7, 2012 9:48 AM
Subject: Re: [C320-list] Prop Shaft Install
 
Thanks Bob.  I do have the cutlass bearing removed.  



I am going to try this again using a different approach before I drop
the rudder.  My concern is bending the SS shaft but after thinking about
it, it should be OK to bend it about 2 inches over the length of the
shaft.



Randy

Le Bijou #719