[C320-list] Wiring Diagram

[Colin Evans]

Thanks Karl,
Yes that is the page I was referring to.
I will email Seaward.
BTW the hull number 774 is in the signature 
*************************
Regards
Colin Evans
Watermark #774
Lake Macquarie, Australia
 

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Karl
Mielenhausen
Sent: Wednesday, 14 November 2012 12:20 AM
To: C320-List at catalina320.com
Subject: Re: [C320-list] Wiring Diagram

Colin,

Unfortunately, all I have as a reference would be page 53 of this file...
http://www.catalina320.com/filemgmt_data/files/Hull645Manual.pdf
which I believe is what you were referring to.

Since these panels were prewired by Seaward, I suggest you give Dennis
Igarashi a call (562-699-7997, Ext 210) or email (dennisi at
seawardproducts dot com).
He has been very helpful in the past.

Making the conversion you describe might be of interest to many of our
members, so let us know what you find out. I see a possible Mainsheet
article, or at least a write-up for the website!!

BTW, always best to list your hull number and year when asking
technical questions.

Karl Mielenhausen

On Tue, Nov 13, 2012 at 12:46 AM, Colin Evans <twosailors at bigpond.com>
wrote:
> We have just had a problem where the engine starter button didn`t release,
> causing the starter motor to be driven by the flywheel at a more than
> healthy speed, and burning out. It didn`t take long.
> My intention is to replace the ignition switch with a 3 position keyed
> switch and get rid of the push button starter.
> Does anyone know of a legible wiring diagram for the starter switch, water
> temp, fuel gauge etc.  The one available in the manual is almost
impossible
> to read.
> *************************
> Regards
> Colin Evans
> Watermark #774
> Lake Macquarie, Australia