[C320-list] RARITAN HEAD

[JJ Morrison]

That's great news Jon! Makes things a lot easier and just another reason for belonging to the C320Assn.
Thanks
JohnM
 

> From: jonvez at comcast.net
> To: C320-List at Catalina320.com
> Date: Tue, 20 Nov 2012 08:49:19 -0500
> Subject: Re: [C320-list] RARITAN HEAD
> 
> John,
> 
> I put a Raritan in my 320 also. There is plywood under the fiberglass where
> the head sits, so you just need to drill for lag bolts....
> 
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of JJ Morrison
> Sent: Tuesday, November 20, 2012 8:28 AM
> To: Catalina List
> Subject: Re: [C320-list] RARITAN HEAD
> 
> 
> OK. How did you get underneath to attach the fasteners? I did this on
> another boat and had to cut an access hole into the bench the toilet sits
> on, did you do this also?
> Thanks
> JohnM
> 1999#574
> 
> 
> > Date: Mon, 19 Nov 2012 16:24:18 -0800
> > From: 320kend at att.net
> > To: C320-List at Catalina320.com
> > Subject: Re: [C320-list] RARITAN HEAD
> > 
> > No, the holes do not match. I filled the old holes and made new ones 
> > for the new head.
> > 
> > Ken
> > 
> > 
> > On 11/19/12 7:48 AM, JJ Morrison wrote:
> > > For Ken Danko;
> > > I'm getting a new Raritan head for my 320 and was looking at your photo
> on the 320 site. I'm assuming that the bolt hole attachments fit where the
> Jabsco was mounted as I can see no access holes where the head sits. Is this
> correct?
> > > Thanks
> > > JohnM
> > > 1999#574
> > 
> 
>