[C320-list] Can't get Wheel Off

[jim brown]

Shouldn't need enough heat to make a difference in expansion or contraction. Just enough to soften hardened grease if that's what is holding it on (It actually on car hubs can make it almost impossible to remove the wheel. Not sure if the same holds true for this wheel with only a keyway.) I have removed my wheel many times (and put it on a holder on the Bimini top) to free up cockpit space when at the dock. It usually slides right off. 

Jim Brown



________________________________
 From: "millers1 at aol.com" <millers1 at aol.com>
To: C320-List at Catalina320.com 
Sent: Monday, April 1, 2013 2:59 PM
Subject: Re: [C320-list] Can't get Wheel Off
 

Jim,  Did you mean "apply heat to the wheel hub" so it would expand away from the shaft OD?
Art


-----Original Message-----
From: jim brown <jbrown5093 at yahoo.com>
To: C320-List <C320-List at Catalina320.com>
Sent: Mon, Apr 1, 2013 12:09 pm
Subject: Re: [C320-list] Can't get Wheel Off


I'd try a little heat on the shaft (hair dryer or heat gun on low). I have a 
couple of old cars with splined hubs and when it's cold the grease hardens 
making it hard to get the wheels off. I know the wheel has grease on the shaft 
since I've spread it all over after removing the wheel. I also have to rock mine 
a little before it slides off. Just a thought. 

Jim Brown




________________________________
From: Allan S Field <allan.field at verizon.net>
To: C320-List at Catalina320.com 
Sent: Monday, April 1, 2013 11:25 AM
Subject: Re: [C320-list] Can't get Wheel Off

I have to wiggle mine around quite a bit while pulling aft but it does come
off.  The rudder should be amidships so that the key does not fall out when
the wheel comes off.

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Jason
Alexander
Sent: Monday, April 01, 2013 10:34 AM
To: c320-list
Subject: Re: [C320-list] Can't get Wheel Off

I can't get the wheel off.   The nut came off with no issue.




On Mon, Apr 1, 2013 at 8:27 AM, jim brown <jbrown5093 at yahoo.com> wrote:

> Can't get the nut off or can't pull the wheel off after removing the 
> locking nut? Edson wheel?
>
> Jim Brown
>
>
>
>
> ________________________________
>  From: Jason Alexander <alexander.jason at gmail.com>
> To: c320-list <C320-List at catalina320.com>
> Sent: Sunday, March 31, 2013 6:42 PM
> Subject: [C320-list] Can't get Wheel Off
>
> So I'm trying to pull the wheel to do some work on my autopilot.  But 
> I can't get the wheel off.  I've read lots of suggestions about PB Blaster
> and a gear puller.   Anyone have any other suggestions or experiences    I
> searched the archives and didn't see anything.
>
> Thanks,
> Jason
>